Page 25 (data 721 to 750 of 1039) | Displayed ini 30 data/page
<< PREV 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 NEXT >>

721	Industry Engineering	ABS-436
The Bread Production Process Using Application of the Hotelling T2 Control Chart Gemintang Segara Asri, Fiella Pramysilia Citra, Shafira Khoirun Nisa, Tika Endah Lestari* Industrial Engineering, Faculty of Engineering and Technology, Sampoerna University, Jakarta *tika.lestari[at]sampoernauniversity.ac.id Abstract Quality Control is an activity to maintain and direct to quality company product (and) services which can maintain the existence of the product in the long term period. In this study, we used the application of the Hotelling T2 Control Chart and Statistical Quality Control (SQC) to control the quality of bread production. Hotelling T2 Control chart is the type of multivariate control chart that is used to monitor the process of identifying the causes of variance and improve the process. In the application of the Hotelling T2 Control Chart, we used three major characteristics of quality, those are expiry, packaging, and price. The second method, Statistical Quality Control, is using the control charts of the cause-effect techniques and diagrams in quality control to minimize the rejected products. Based on the identification the number of products that fail is still within reasonable limits located between UCL and LCL. The main cause of the signal out of control is the packaging of the product. As the endeavor improvement from the company, the production process is increasing in the second phase. Keywords: Hotelling T2, Control Chart, Statistical Process Control PermaLink | Plain Format | Corresponding Author (Gemintang Bening Segara Asri)

722	Industry Engineering	ABS-442
Consumer Perspectives on Food Safety in Supply Chain for Small and Medium Enterprises (SMEs) Product Hana Catur Wahyuni, Ida Agustini Saidi, Wiwik Sumarmi Universitas Muhammadiyah Sidoarjo Abstract SMEs are an important economic element in Indonesia. One of the products produced by SMEs is food. On the other hand, the development of consumer knowledge on food quality is increasing rapidly. These conditions require producers to provide quality food. Foods that meet the elements of food safety is one form of quality assurance for consumers. Therefore, producers need to know the extent of the consumers perspective on food safety. This study aims to determine consumer perceptions of the level of importance of food safety aspects. Especially in the process of selecting / buying food. The study was conducted using a questionnaire consisting of two parts. The first part is a questionnaire to find out the identity of the respondent, second questionnaire to determine the level of importance of food safety by consumers. Questionnaire consists of seven questions. Questionnaires were distributed online in February 2019. Data processing was carried out using descriptive statistics. This study consisted of 217 respondents from men (41%) and women (59%). The results showed that 75.6% of respondents rated food safety aspects as very important in the process of buying food. 66.8% considered food safety aspects to be closely related to food quality. 75.5% of respondents rate strongly agree to know the elements contained in food. 65% of respondents rate strongly agree to know that food is produced in a good manufacturer. 56.2% of respondents rate strongly agree that food must be distributed in a good transportation to ensure food safety. 57.1% Respondents considered strongly agree to pay attention to food safety aspects in the sales process. 48.1% Respondents agree that food safety certification is a guarantee that the food is safe and lawfully consumed. Keywords: Food safety, SMEs, quality, supply chain, Consumer PermaLink | Plain Format | Corresponding Author (Hana Catur Wahyuni)

723	Industry Engineering	ABS-187
Identification of Supporting Factors of Local Food Products Towards The Global Market Competition Andri Ikhwana, Fitri Purwa Alinda Department of Industrial Engineering, Sekolah Tinggi Teknologi Garut Abstract Local food products that have been known as icons of a region are faced with global market competition so that they are required to have competitiveness in fighting for the global market with the hope that business activities that rely on local identity are not lost and displaced by the arrival of various products that can replace product functions and roles on global competition. This study aims to identify the factors that support the sustainability of the local food product business so that it can compete in the global market and determine the strategies that must be done. To support this research activity, the method used is the analysis of factors supported by 100 respondents conducted using the accidental sampling method involving various groups of respondents. Based on the results of the study, it was found various factors that support the sustainability of local food product businesses, namely: lifestyle factors, individual factors, promotion factors and places, and product identity factors. Furthermore, so that the business activities of local food products can survive and be sustainable, the strategies that must be carried out are product innovation, intensive promotion, and determining a strategic sales location. Keywords: local food products, global markets, factor analysis PermaLink | Plain Format | Corresponding Author (Andri Ikhwana)

724	Industry Engineering	ABS-699
THE EFFECT OF ADDITION OF POLYMER ON VISCOSITY AS FLUID OF INDUSTRIAL OIL AND GAS INJECTION IN EOR METHOD Havidh Pramadika (a*), Samsol (a), Bayu Satiyawira(a) (a)Petroleum Engineering Departemant, Univesitas Trisakti *havidh[at]trisakti.ac.id Abstract Indonesian oil and gas needs continue to increase, all of which are inversely proportional to oil and gas production which is always decreasing, one of the efforts to increase production is by EOR injection, one of the EOR injections is polymer injection. In this study we will use FP3300S polymer with a concentration of 500ppm, 750ppm, 1,000ppm, 1,250ppm, 1,500ppm, 1,750ppm, 2,000ppm, 2,250ppm and 2,500ppm. The purpose and objective of this study was to determine the effect of polymer concentration on increased viscosity, determine effect of polymer concentration on polymer screening (compatibility, filtration, screen factor, thermal stability), and to find out how the results of polymer injection, the higher the study found. polymer concentration the higher the viscosity where the highest at the polymer concentration of 2,500ppm with 19,38cp, the viscosity needed by the polymer as the injection fluid is the polymer viscosity greater than 2X the oil viscosity to be injected, where the oil viscosity is 5,2cp. then while in polymer screening it is found that the higher polymer concentration is not necessarily good for screening polymers, and polymer inclusions have been shown to increase recovery factor, recovery factor obtained at 51.5% water injection and polymer injection is 23.1%, before injection really need to be on do screening first, in order to get the most optimal concentration to be injected. Keywords: Consentration, Polymer, Injection. PermaLink | Plain Format | Corresponding Author (Havidh Pramadika)

725	Industry Engineering	ABS-700
THE EFFECT OF DRILLING MUD MEDIA FROM OIL WELL HOLE CLEANING IN OIL AND GAS INDUSTRY Apriandi Rizkina Rangga Wastu (a*), Abdul Hamid (a), Samsol (a) a) Petroleum Engineering Department, Universitas Trisakti *apriandi.rizkina[at]trisakti.ac.id Abstract The function of drilling mud is to lift drill cuttings to surface while maintaining condition in drilling hole. The purpose of this study was to determine ability to lift cutting in oil drilling wells using Cutting Transport Ratio, Cutting Concentration and Cutting Carrying Index methods. In drilling operations there are two important things must be considered in the wellbore cleaning, namely pumps and drilling mud rheology. Penetration formation layer will result in cutting due to chisel that erodes the rock so that if left unchecked it can accumulate at the bottom borehole. The speed of flow of sludge fluid is flowed, the flow pattern in circulation of sludge, and ability to lift the cutting in well are affected by mud pump to determine flow rate of pump. In addition to the value of rheology of sludge such as plastic viscosity and yield point values of mud density also affect the performance of the sludge to be a medium for lifting drill bits. Provisions on the method for lifting the cutting with the Cutting Transport Ratio method must have a value of> 90%, the Cutting Concentration method has a value of <5%, and Cutting Carrying Index has a value of 1. Keywords: Cutting, Drilling fluid, Cutting Transport Ratio, Cutting Concentration and Cutting Carrying Index PermaLink | Plain Format | Corresponding Author (Apriandi Rizkina Rangga Wastu)

726	Industry Engineering	ABS-194
An Analytical Hierarchy Process for A Product Plan of Tofus Micro and Medium Enterprises Rina Kurniawati Department of Industry Engineering, Sekolah Tinggi Teknologi Garut, Jl. Mayor Syamsu No. 1 Garut 44151, Indonesia *rinakurniawati[at]sttgarut.ac.id Abstract In Tofus micro and medium enterprises, there is one traditional activity that is conducted repeatedly, called the cutting process. This cutting process is done by using a kitchen knife which makes it not efficient and can cause fatigue for operators. In addition, there is also the possibility of different sizes of tofu pieces because there is no measuring tools to cut it. This is because operators just follow the mold flow on the tofu. This study is aimed to make a product plan for tofu cutting tools. The Analytical Hierarchy Process was used as a research method in this study. This method begins with conducting interviews regarding the choices in level 1, 2 and 3 actions to several respondents. The respondents must choose and give an assessment on a scale of 1 to 9. The result taken from a variety of alternative solutions, which is made based on requirements specifications, is that the product of the tofu cutting tool is selected with materials made of pine wood, strings, handles, naples, and naple bolts. Moreover, the product produced will have a size of 52 x 52 cm2. The product design is based on material and tool specifications to produce a simple design. This is made so that the tofu cutting tool is easy to use as well as low cost. Keywords: Analytical Hierarchy Process; Micro and Medium Enterprises; Product Plan; Traditional Activity PermaLink | Plain Format | Corresponding Author (rina kurniawati)

727	Industry Engineering	ABS-747
Identification causative factor of project delay N212-400 product PT. Dirgantara Indonesia agung satryo, sri widiyanesti telkom university Abstract This research object on PT. Dirgantara Indonesia is the aerospace industry that focusing on production light aircraft or remote airplane, one of product PT. Dirgantara Indonesia N212-400 that have five ordered by Phillipine and Veitnam had a delay project. In this qualitative research with research approach is case study approach in identification causative factor of project delay, with the purpose of study is descriptive research and the process data validity and reliability using triangulation method. The data analysis in this research is the productivity of project, potential failure mode of the project using FMEA (Failure Mode and Effect Analysis) and fishbone diagram to determine the cause and effect the project delay. Result of the productivity during the project N212-400 is 40% and 40% productivity in aerospace industry is in the below average of aerospace industry that are 70% - 80%. By using fishbone and FMEA is identify the cause of delay and the potential failure of delay project N212-400 the main factor of project delay based on fishbone and FMEA is machine and material process. Both of key factor have high score of RPN (Risk Priority Number) that is 810, and this process should be give priority improvement. Keywords: Aerospace, Delay Project, Fishbone Analysis, Productivity, Failure Mode and Effect Analysis PermaLink | Plain Format | Corresponding Author (sri widiyanesti)

728	Industry Engineering	ABS-240
Supply Chain Support Factors for Brown Sugar Business Optimality Using Analytical Hierarchy Process a) Andri Ikhwana, a) Ilham Muhammad Swandy, b) Ridwan Setiawan a) Department of Industrial Engineering, b) Department of Informatics Engineering Sekolah Tinggi Teknologi Garut Abstract The sustainability of business activity is determined by the existence of all elements involved in business activity. Alignment of each component involved in business activities can be determined by identifying supporting factors based on activities in each business chain that occurs. This study aims to determine the supporting factors for the optimality of supply chain performance of brown sugar business activities using the supply chain management approach and supported by the analytical hierarchy process method in determining criteria that support brown sugar business activities. Based on the results of research on the supply chain of brown sugar business activities, to support the sustainability and optimality of supply chain performance the brown sugar business on the elements involved in the brown sugar business consists of several factors including product quality, the cost of purchasing brown sugar raw materials, and accuracy and the suitability of the number of shipments that are in accordance with the request. Keywords: supply chain management, decision analysis, analytical hierarchy process PermaLink | Plain Format | Corresponding Author (Andri Ikhwana)

729	Industry Engineering	ABS-498
Optimal distribution route to minimize transportation costs in the soft drink industry Anita Christine Sembiring, Agus Sanjaya, and Willyanto S Universitas Prima Indonesia Abstract Minimum mileage and maximization of utilities will help the product distribution process to be optimal. Soft drink companies in the city of Medan have problems in distributing products to consumers who are not on time. This is related to the lack of regulation of product distribution channels by the company. Therefore this research was conducted to optimize product distribution routes in order to minimize distribution costs. With the Traveling Salesman Problem (TSP) method, it will combine several closest distribution routes and improve the route sequence. Then the development of sub-routes that are formed from the travel time and utility of transportation equipment used. Formation of sub-routes is still done manually while increasing the order of sub-routes is done by using the Software Quant System (QS) version 3.0. and produce minimum mileage on each sub-route. 6 sub-routes are carried out in one week and are served by 1 transportation car with a capacity of 220 crates. The proposed sub-route is 171 km shorter than the available sub-routes, thus shortening the travel time by 302 minutes to transport the product and save transportation costs of Rp. 68800, - (per week). Keywords: Distribution route; Traveling Salesman Problem; Utility PermaLink | Plain Format | Corresponding Author (Anita Christine Sembiring)

730	Industry Engineering	ABS-760
WORK SAFETY ANALYSIS OF FIREFIGHTERS Jafar Amiruddin (a*), Basuki Wibawa (b), Daniel J. Napitupulu (c) (a) Department of Fire Safety Engineering, Universitas Negeri Jakarta p3iunj[at]yahoo.com; jafar_amiruddin[at]unj.ac.id (b) Department of Mechanical Engineering Education, Universitas Negeri Jakarta (c) Fire & Rescue Management Office, DKI Jakarta Abstract This study aims to analyze the risk of occupational safety of firefighters using the AS / NZS 4360: 1999 semi-quantitative analysis method. The research was conducted at the East Jakarta Fire & Rescue Management Office. There are five stages of firefighters work that are analyzed: (1) Preparation / before departure, (2) Travel to the location of the fire, (3) Arriving at the location of the fire, (4) Extinguishing fires, (5) Post-fire suppression. The results showed: (a) Risk of work with acceptable categories as many as 13 risks, (b) Priority categories as many as 4 risks, (c) Substantial categories with 3 risks, (d) priority 1 categories as many as 5 risks, (e) very high category as many as 8 risks. Keywords: risk of occupational safety, firefighters, fire prevention service PermaLink | Plain Format | Corresponding Author (Jafar Amiruddin)

731	Industry Engineering	ABS-765
The Hybrid Binary Dragonfly: An Effective Algorithm to Minimize Carbon Emission on Flow Shop Scheduling With Dependent Set Up and Removal Dana Marsetiya Utama (a*), Dian Setiya Widodo (b), Shanty Kusuma Dewi (a) a) Departement Industrial Engineering, University of Muhammadiyah Malang, Jl. Tlogomas No. 246, 65144 Malang, East Java, Indonesia *dana[at]umm.ac.id b) Vocation Faculty, University of 17 Agustus SurabayaJl. Semolowaru, Menur Pumpungan, Sukolilo, Surabaya 60118 East Java, Indonesia Abstract Recently, the manufacturing sector produces the primary source of carbon emissions. Therefore, it must consider the environmental aspect and economic impacts. Carbon emissions have become one of some an essential indicator of the company’s. One of some way to minimize carbon emission is scheduling appropriately. This study aims to reduce carbon emission in the permutation flow shop scheduling problem (PFSP). This problem considers the sequence of dependent set up and removal. We developed the Hybrid Binary Dragonfly Algorithm (HBDA) to solve that issue. In the HBDA, we offered 10% search agent use NEH algorithm. NEH is one of the useful heuristic algorithms. In this study, we did some numerical experiments. It did explore the best algorithm parameter and algorithm effectiveness. Some popular algorithm compares algorithm HBDA. The results show, there is some scenario to decrease carbon emissions in several various problems. Moreover, The HBDA proved useful to reduce carbon emission compared to other algorithms. Keywords: Carbon Emission; Flow shop; Scheduling; Hybrid Binary Dragonfly; Metaheuristic PermaLink | Plain Format | Corresponding Author (Dana Marsetiya Utama)

732	Industry Engineering	ABS-766
Sustainable Economic Order Quantity Model with Warehouse Costs and Capacity Limits Dana Marsetiya Utama (a*), Dian Setiya Widodo (b), Shanty Kusuma Dewi (a) a) Departement Industrial Engineering, University of Muhammadiyah Malang, Jl. Tlogomas No. 246, 65144 Malang, East Java, Indonesia *dana[at]umm.ac.id b) Vocation Faculty, University of 17 Agustus SurabayaJl. Semolowaru, Menur Pumpungan, Sukolilo, Surabaya 60118 East Java, Indonesia Abstract Recently, the problem of minimizing carbon emissions in manufacturing has become a focus of much research. One of the efforts that were successfully carried out was managing the sustainable economics order quantity (SEOQ). However, several SEOQ had assumption such as (1) warehouse costs are ignored, (2) warehouse emissions are avoided, and (3) warehouse costs are ignored. In this paper, we developed the SEOQ model with warehouse costs and capacity limits. There are two proposed SOQ models. Model 1 was the SEOQ model with warehouse costs and carbon emissions. At Model SEOQ 2, this model considered warehouse costs, carbon emissions, and capacity. We also proposed procedures to minimize total inventory costs. Finally, a numerical experiment was conducted to test the model. Based on numerical experiments, the proposed model useful to solve SEOQ problems with warehouse costs and capacity limits. Keywords: SEOQ; EOQ; carbon emissions; Inventory; capacity limits PermaLink | Plain Format | Corresponding Author (Dana Marsetiya Utama)

733	Information Engineering	ABS-1024
The Implementations of Fuzzy C-Means algorithm in Research Topics Classification in Information Engineering Departement of UIN Sunan Gunung Djati Deny Fauzy (a*), Muhammad Indra Nurardy Saputra (a), Ridwan Abdul Hakim (a), Popon Dauni (a), Muhammad Deden Firdaus (a) a) Sunan Gunung Djati State Islamic University Bandung *fauzydeny[at]uinsgd.ac.id Abstract The fast growth and a large number of electronic documents stored in the university library or Department repositories such as thesis, research report, etc., now available in digital version. With automatic process in grouping the thesis title, it can help the policy holder like the head of department. In this case we are using fuzzy c-means algorithm that can classify the data in clusters, so the data in that cluster has a high-level accuracy each other. In the application there is the text mining method which is the developed data mining method that can be applied to solve the thesis or research report classification problem. The result is the web application that can classify the thesis or research report data with 98% accuracy. The result is the given accuracy based on the fuzzy c-means algorithm on the system. Keywords: Fuzzy C-Means; Cluster; Web Services; Text Mining PermaLink | Plain Format | Corresponding Author (Deny Fauzy Rakhman)

734	Information Engineering	ABS-782
Evaluation and Efficient Measurement I-Canang Digital Startup in Bali with Questionnaire User Experience and Lean Startup Machine Validation Board AAA Putri Ardyanti (*), IP Pande Satria Wibawa, IG Juliana Eka Putra STMIK Primakara Jalan Tukad Badung No 135 Denpasar Bali putri.ardyanti[at]primakara.ac.id Abstract The rapid increase from the industrial revolution 4.0, affected changes in business patterns in Indonesia, including Bali. This research aims about how to create digital business with Lean Startup Machines and Questionnaire User Experience method (UEQ). This business originated from the fact that women workers in Bali had difficulty to buy traditional ceremonial equipment. We had to research almost one year from the customer and market before built the application. First at all, we must concept design of website. Lean startup model is designed to minimize the risk of returns from products made for market needs. One of tools in this method for customer validation is the validation board. From the research obtained from the core assumptions to survey directly prospective customers for the minimum success criteria that are required. This research had 70% of success required which up to 3 times for the pivot. While the results of the Questionnaire User Experience method (UEQ) the opinion of the community about the system that had made get the overall average impression of Attractiveness (1.71), Persicuity (1.35), Efficiensy (2.66), Dependability (0.92), Stimulation (1.28) dan Novelty (0.69). Keywords: Startup, Bali, I-Canang, UEQ, Lean Startup Machine PermaLink | Plain Format | Corresponding Author (Anak Agung Ayu Putri Ardyanti)

735	Information Engineering	ABS-16
Analysis of Mobile Learning Infrastructure in Mobile Learning Integration and Project Based Learning in Technological and Vocational Education Sugiyanto, Agus setiawan, Ida Hamidah, Ana A Technological and Vocational Education Programs Graduate School, Universitas Pendidikan Indonesia. Jl. Dr. Setiabudhi no 229, Bandung, West Java, Indonesia. Corresponding author : agus_setiawan[at]upi.edu Abstract The development of applications on smartphone devices might be potential to help improving teaching and learning process. The research analyzes  IT infrastructure and preparedness in mobile learning and project based learning (PjBL) integration of vocational education. The research data was collected by questionnaires from 100 students of the tenth grader in a computer and network engineering program of the vocational school. The results of the research show that the IT device which owned by the school has been qualified for implementating mobile learning and project based learning (PjBL). The research also found that there was preparedness from students to participate actively  in learning process by using mobile learning and Poject based learning (PjBL) integration model that was carried out digitally (online based),  so that teachers could implement learning scenarios by using records learning to upload and access online, whenever and wherever by students and teachers who are monitored and evaluated in real time through the system. The mobile application as an interface that is accessed by using information technology devices such as smarthphones, netbooks, personal computers through internet/intranet network media by data sources of various digital documents learning in documents files, pdfs, videos, presentations and images stored in the cloud suitable the syntax project based learning based on basic competencies that must be achieved by students with certain spectrum in learning which includes the achievement of three competence elements, there are affective, cognitive and psychomotor. Keywords: Mobile Learning, Project Based Learning, Vocational Education PermaLink | Plain Format | Corresponding Author (Sugiyanto -)

736	Information Engineering	ABS-22
Geographic Information System for Mapping Public Service Location Dede Kurniadi (a*), Asri Mulyani (a), Yosep Septiana (a), Ridwan Setiawan (a), Gugun Geusan Akbar (b) a) Department of Informatics, Sekolah Tinggi Teknologi Garut, Jalan Mayor Syamsu 1, Garut, Indonesia *dede.kurniadi[at]sttgarut.ac.id b) Department of Public Administration, Universitas Garut, Jalan Raya Samarang 52A, Garut, Indonesia Abstract This article aims to analyze, design, and development public service location mapping system based on Geographic Information System (GIS). GIS technology is a useful information system used in making information systems for mapping areas and locations accurately so that it can make it easier for people to obtain information on the distribution of places of public services and facilitate the path to the site. Data used is sourced from external data and observational data in the field. The software development model uses the Rapid Application Development approach which consists of four phases namely, planning requirements, user design, construction, and cutover. The results of this study are applications for mapping the location of public services that have features of fast search, geomap, know the nearest public service, add data by users with the login feature via social media, and features easy access via android smartphone. Keywords: GIS; public service location; mapping system; rapid application development PermaLink | Plain Format | Corresponding Author (Dede Kurniadi)

737	Information Engineering	ABS-555
A KNOWLEDGE BASED SYSTEM FOR DIAGNOSING HEART DISEASES Cindy Pamela Cornelia Munaiseche (a*), Vivi Peggie Rantung (b), Nancy Silvia Bawiling (c) (a, b) Department of Informatics, Faculty of Engineering, Universitas Negeri Manado, Sulawesi Utara, Indonesia *cindymunaiseche[at]unima.ac.id (c) Department of Public Health, Faculty of Sport Science, Universitas Negeri Manado, Sulawesi Utara, Indonesia Abstract The purpose of this study to design a knowledge based system that called expert system application for diagnosing heart diseases by using forward chaining method as one of inference technique and analyze the software functionality through black box testing. The heart organ chosen because many mortality rates are caused by sudden heart attacks. The expert system application design consists of seven stages: preliminary studies, data collection, data analysis, system design, system implementation, and the last, drawing conclusions. Expert system software application built to recognize the type of heart disease after consultation by answering a few questions about the symptoms of disease that displayed by the system, and can infer the type of heart diseases suffered by the patient. In addition, an application created to provide solutions or actions that can be performed by patients in relation to heart disease he suffered. Based on the results of black box testing, the expert system application has been running with good functionality. Keywords: Expert System, Forward Chaining, Heart Disease, Inference, Black Box Testing PermaLink | Plain Format | Corresponding Author (Cindy Pamela Cornelia Munaiseche)

738	Information Engineering	ABS-45
Information Systems Strategic Planning for Healthcare Organizations using Ward and Peppard Model Yosep Septiana (*), Asri Mulyani, Dede Kurniadi Department of Informatics, Sekolah Tinggi Teknologi Garut, Jalan Mayor Syamsu 1, Garut 44151, Indonesia *yseptiana[at]sttgarut.ac.id Abstract Healthcare organizations can use differentiation and cost reduction strategies to gain a competitive advantage and can survive in fierce competition by implementing information system strategies. The research aims to build an information system for strategic planning in healthcare organizations. The information system strategic planning method used is the Ward and Peppard Model with a formulation framework and strategic planning process covering the stages of input, output, and evaluation of information system interpretation. The input stage includes an analysis of the business and information systems environment. Output stages include business information system, information system management strategies and information system strategies. The evaluation phase of information system interpretation is modified by the use of Balance Scorecard Information Technology, and the evaluation stages are carried out after the information system planning and application mapping so that the application portfolio is aligned with the corporate contribution perspective, user orientation, operational excellence, and future orientation. The result of this research produced a recommendation for healthcare organizations in the form of development priorities which include the establishment of an information system unit and the development of an application portfolio that will support the business processes sustainability Keywords: Balance Scorecard; Healthcare; Information System; Strategic Plan; Ward and Peppard PermaLink | Plain Format | Corresponding Author (Yosep Septiana)

739	Information Engineering	ABS-51
Strategic Planning for The Implementation of Tourism Information Systems Asri Mulyani (a*), Yosep Septiana (a), Dede Kurniadi (a), Teguh Wahyono (b) a) Department of Informatics, Sekolah Tinggi Teknologi Garut, Jalan Mayor Syamsu 1, Garut, Indonesia *asrimulyani[at]sttgarut.ac.id b) Department of Information Technology, Satya Wacana Christian University, Salatiga, Indonesia Abstract This research aims to plan a tourism information system implementation strategy to increase the number of visitors, with a case study on animal park tourism. Based on the evaluation of the organizations business processes with information systems that are running is considered not effective, the strategic planning of information systems is needed to help leaders and managers in carrying out their duties to improve work efficiency by automating the information management process, increasing management effectiveness by satisfying information needs for decision making, and improve competitiveness to improve the organizations competitive advantage by changing the style and manner of doing business. The methodology used by Ward and Peppard strategic planning model with the stages of analysis of Political Social Economy Technology, Strength Weakness Opportunities Threat, Mission Objective Strategy Tactics, Critical Success Factors, Balance Score Card, Value Chain, and Information System Strategy. The results of the research are in the form of a strategic framework and information system implementation plan and technology that is in line with the organizations business strategy plan. Keywords: strategic plan; information system; tourism; ward and peppard PermaLink | Plain Format | Corresponding Author (Asri Mulyani)

740	Information Engineering	ABS-1075
Neighborhoods Geographic Information System to Prevent Home Robbery Muhammad Ihsan (a*), Dede Sugandi (a), Asri Ria Affriani (a), Shafira Himayah (a) (a) Departement of Geography Education, Universitas Pendidikan Indonesia Jalan Setiabudhi No.229,Bandung 40154, Indonesia Abstract The purpose of this study is to apply a geographic information system to analyze the vulnerability of home robbery in neighborhoods. To support the research, we use the Scoring Method with a two parameter overlay using the Geographic Information System. The results showed that the Geographic Information System in the neighborhoods can visualize the neighborhood map, based on the analysis conducted, there are 10 houses that have the potential for home robbery, because based on the Vulnerability analysis, the 10 houses belong to the category of vulnerable categories (categories 4-5) . Based on these results, the information from this study can be used as a reference and study material in maintaining the security in neighborhoods. Keywords: Geographic Information System, Neighborhoods, Home Robbery PermaLink | Plain Format | Corresponding Author (Muhammad Ihsan)

741	Information Engineering	ABS-53
Design of Culinary Information System based on Android using Multimedia Development Life Cycle Asri Mulyani (*), Dede Kurniadi, Yosep Septiana, Ridwan Setiawan Department of Informatics, Sekolah Tinggi Teknologi Garut, Jalan Mayor Syamsu 1, Garut, Indonesia *asrimulyani[at]sttgarut.ac.id Abstract The development of smartphone application technology makes it easier for people to obtain information without being limited by space and time. One of them is the development of an Android smartphone-based culinary information system application that allows culinary information to be accessed anywhere and anytime online with the hope that it can be utilized in the field of marketing and promotion to increase sales and revenue. This article aims to design an Android-based culinary information system application to make it easier to provide culinary information to the public. The methodology used is a multimedia development life cycle with stages covering, concept, design, collecting, assembly, testing, and distribution materials. The results of this study are in the form of android-based culinary information applications. Contributions given by this application can provide typical culinary information from various regions, especially in Indonesia. Keywords: information system; culinary; multimedia; android PermaLink | Plain Format | Corresponding Author (Asri Mulyani)

742	Information Engineering	ABS-314
SOFTWARE REQUIREMENTS SPECIFICATION ON CITIZEN DATABASE INFORMATION SYSTEM OF LOCAL EGOVERNMENT USING ISO/IEC/IEEE 29148 2011 EDITION STANDARD Meme Susilowati (a*), Moh Ahsan (b), Yudhi Kurniawan (a) (a) Program Studi Sistem Informasi, Fakultas Sains dan Teknologi, Universitas Ma Chung, Villa Puncak Tidar Blok N-1, Malang Jawa Timur (b) Program Studi Teknik Informatika, Fakultas Sains dan Teknologi, Universitas Kanjuruan Malang, Jl. S. Supriadi, No. 48 Malang Jawa Timur Abstract The management citizen database is Improper and not up-to-date will results decisions that are not strategic for the village development process. Inappropriate citizen data also results in long-term ineffective local government planning processes. Such as the problem of forecasting or predicting the level of growth of citizens as well as the need for development services which are part of the medium-term long-term plans of local governments. Because it requires a citizen database information system. In connection with the needs of citizen database information systems, this study provides a solution of analyzing documents, namely the requirement specification software for citizen database information systems using the ISO / IEC / IEEE 29148 edition of 2011. The study was conducted with case studies of 6781 management data of residents of the village of Sumbersekar, Malang Regency, East Java. The method to execute the research consisted of data gathering stages, data flow and decision analysis, and the last is create software requirement specification. the specific requirements of the SRS documents ISO / IEC / IEEE 29148 2011 edition are external interfaces, functions, usabilit requirements, performance requirements, logical database requirements, design contraints, software system attributes, supporting information and verification. Keywords: local governance, software requirement specifications, database information system, sumbersekar, ISO / IEC / IEEE 29148-2011 PermaLink | Plain Format | Corresponding Author (Meme Susilowati)

743	Information Engineering	ABS-59
Design of Knowledge Management System to Improve Employee Capabilities in Organizations Deni Heryanto Department of Informatics, Sekolah Tinggi Teknologi Garut, Jalan Mayor Syamsu 1, Garut, Indonesia Abstract This article discusses the design of a cloud computing based knowledge management system, the purpose of this study is to integrate KMS with Cloud Computing to improve the organizations business processes and make recommendations on Cloud Computing-based KMS concepts. The method proposed in this study was to use Scrum, Scrum exposes the ineffectiveness of product management and work techniques that were carried out, so as to continuously improve the resulting performance, team, and environment work in the company. The KMS design was started from data analysis which became the determining factor for KMSs success in the organization by using critical success factors and Balanced scorecards which focused on learning and growth, referring to the core knowledge management process based on cloud computing. Keywords: Knowledge Management System; Scrum; Core Process; Cloud Computing; System Recommendation PermaLink | Plain Format | Corresponding Author (Deni Heryanto)

744	Information Engineering	ABS-67
The effectiveness of Evaluation Application Implementation Based on Alkin(CSE-UCLA)-Weighted Product Model to Evaluate the Digital Library Services as Education Supporting Facilities Dewa Gede Hendra Divayana (a*), P. Wayan Arta Suyasa (a), Ida Bagus Gede Surya Abadi (b) a) Department of Information Technology Education, Universitas Pendidikan Ganesha Jalan Udayana No. 11, Singaraja, Bali, Indonesia *hendra.divayana[at]undiksha.ac.id b) Department of Evaluation in Education, Universitas Pendidikan Ganesha Jalan Udayana No. 11, Singaraja, Bali, Indonesia Abstract Digital library can be said to be quality if it has been able to give services optimally to support the learning process. Efforts to get optimization of digital library service can be executed through evaluation process. One application that can be used to evaluate the optimization level of digital library is evaluation application that combines the Alkin (CSE-UCLA) model with Weighted Product. Related to that statement, this study purpose was to obtain an overview of evaluation application effectiveness used to evaluate the digital library services optimization on computer colleges, especially in Bali. The method used in this study was R&D with Borg&Gall design, especially in implementation stage. The subjects involved in assessment of evaluation application implementation were 32 peoples, such as two education experts, 15 evaluators, and 15 users. This study location was carried out on six computer colleges in Bali. The data collection was conducted by distributing questionnaires that consist of 15 items to all research subjects. The analysis technique for data collection results uses quantitative descriptive based on effectiveness percentage level of digital library services. These study results indicate the effectiveness level of evaluation application based on Alkin(CSE-UCLA)-Weighted Product model was 86.38% so that it includes good category. Keywords: Effectiveness; Evaluation Application; Alkin(CSE-UCLA), Weighted Product; Digital Library PermaLink | Plain Format | Corresponding Author (Dewa Gede Hendra Divayana)

745	Information Engineering	ABS-70
Combining Statistical and Interpretative Analyses for Testing IT Implementation Readiness Questionnaire Mohamad Irfan, Syopiansyah Jaya Putra Departement of Informatics Engineering UIN Sunan Gunung Djati Banfung, Departement of Information System UIN Syarif Hidayatullah Jakarta Abstract Researchers often use interpretative data analysis to test questionnaires by confirming the results of statistical analysis, but the researchers did not elaborate comprehensively how confirmation was made. Most use statistical analysis techniques only to test and assess questionnaires. In addition, interpretive confirmation is common for experienced researchers when conducting research, in contrast to novice researchers who have problems confirming the interpretive results of the questionnaire. This study explains how to combine statistical and interpretative analysis with testing the IT implementation questionnaire on HEI. The aim is to assess the questionnaire using statistics and interpret the results of statistical analysis. This finding can help researchers to test questionnaires; confirmation results can be a consideration and knowledge to revise the questionnaire. Keywords: IT Implementation Readiness; Statistical Analysis; Interpretative Analysis; Questionaire Assessment; PermaLink | Plain Format | Corresponding Author (Mohamad Irfan)

746	Information Engineering	ABS-71
Preliminary Design of CIPP-SAW Evaluation Model in Measuring ICT-based Learning Effectiveness in Health Colleges I Putu Wisna Ariawan (a), Made Kurnia Widiastuti Giri (b), Dewa Gede Hendra Divayana (c*) a) Department of Mathematics Education, Universitas Pendidikan Ganesha Jalan Udayana No. 11, Singaraja, Bali, Indonesia b) Department of Medical, Universitas Pendidikan Ganesha Jalan Udayana No. 11, Singaraja, Bali, Indonesia c) Department of Information Technology Education, Universitas Pendidikan Ganesha Jalan Udayana No. 11, Singaraja, Bali, Indonesia *hendra.divayana[at]undiksha.ac.id Abstract Evaluation activities are essential to be conducted to measure the effectiveness level of the ICT-based learning process in colleges, including also specifically for health colleges. Evaluation models that are often used to measure ICT-based learning effectiveness in health colleges are formative-summative models. However, reality shows that the evaluation model is not effective. The problems solving to overcome that problem is to develop a new evaluation model in the form of CIPP (Context-Input-Process-Product) model based on SAW (Simple Additive Weighting) so that it can show the assessment accuracy level to ICT-based learning quality aspects. This study purpose was to know the initial design of the CIPP model based on SAW. This research uses the Borg & Gall development method, which focuses on the model design phase. Subjects involved in designing this evaluation model were three peoples with academic classifications in the fields of information technology, educational evaluation, and health. The research results showed that there was a clear evaluation model design using CIPP evaluation components and SAW methods in conducting learning evaluation. Keywords: Model; Evaluation; CIPP; SAW; Effectiveness PermaLink | Plain Format | Corresponding Author (Dewa Gede Hendra Divayana)

747	Information Engineering	ABS-76
Determining an algorithm as the researchers contribution: An alternative to performance-based research honorarium Zulfikar Bagus Pambuko (a,b*), Agus Setiawan (c); Heni Setyowati Esti Rahayu (a,d); Retno Rusdjijati (a,c); Muji Setiyo (a,c); Moehamad Aman (a,c); Chrisna Bagus Edhita Praja (e) a) Center of Research, Development, and Community Services, Universitas Muhammadiyah Magelang, Indonesia b) Faculty of Islamic Studies, Universitas Muhammadiyah Magelang, Indonesia c) Faculty of Engineering, Universitas Muhammadiyah Magelang, Indonesia d) Faculty of Health Sciences, Universitas Muhammadiyah Magelang, Indonesia e) Faculty of Law Sciences, Universitas Muhammadiyah Magelang, Indonesia *zulfikar.bp[at]ummgl.ac.id Abstract The research grant is carried out with a quality assurance cycle that involves the research group to produce the research outcomes such as publication, books, or other intellectual property. However, there are problems regarding the distribution of honorariums from the rest of the budget so that they are fair according to the contributions of each researcher. Therefore, this study established the algorithm to produce the fairness index of honorarium distribution based on the researchers contribution. The index was built on the input which is a manifestation of research quality assurance cycle and implemented in pseudocode and flowchart. A simulation of three conditions that showed different contributions from each researcher was carried out with accurate results. Keywords: PermaLink | Plain Format | Corresponding Author (Zulfikar Bagus Pambuko)

748	Information Engineering	ABS-89
Analysis of Industrial Relations Information System Availability on State Vocational High School Websites Danil Efsya Putra*, Ade Gafar Abdullah, Wawan Purnama Pendidikan Teknik Elektro, Universitas Pendidikan Indonesia Jalan Dr. Setiabudhi No. 229, Bandung 40154, Indonesia Abstract Internet has an important role in the development of education as a medium of information and learning media for students and teachers. The use of Internet as an information medium needs to be maximized as much as possible. School and job-related information are also needed by many parties. Therefore, it is necessary to have an information system in the form of website to support the need of those works. This research was conducted to analyze industrial relations information system availability on state vocational high school websites in West Java Province. The method used is content analysis and survey. Content analysis includes reviewing website content by general categories (industrial relations content, school contact content, job information content, job information update content, direct content to the company website and information of partnership content). Survey includes direct observation of the website in order to find and obtain data regarding industrial relations information systems availability on the school website which will be examined. The object in this research is the state vocational high school website in West Java Province. The findings of this research were found that most schools still ignore the availability of websites, especially the distribution of job vacancy information. Keywords: school websites; industrial relations information system; vocational high school PermaLink | Plain Format | Corresponding Author (Danil Efsya Putra)

749	Information Engineering	ABS-91
Implementation of TOPSIS Method on Selection of New Employees Acceptance of Public Hospital Diena Rauda Ramdania(a*), Khaerul Manaf(b), Fikri Rahmat Junaedi(c), Nur Lukman(d), Yogi Saputra(e) a-e) Department of Informatics, UIN Sunan Gunung Djati Bandung Jl. A.H. Nasution No.105 Cibiru, Bandung, West Java, 40614, Indonesia *diena.rauda[at]uinsgd.ac.id Abstract A hospital is a labor-intensive organization that requires many personnel and professions from various disciplines. Employees are one of the determinants of the success of a company. One way that agencies use to obtain qualified employees is by making a selection at the time of employee recruitment. The problem that is often encountered is that part-time employee selection is done manually so that it is less efficient and accurate in the selection process. Decision support systems with the TOPSIS method are considered suitable to assist the personnel section of the public hospital in selecting prospective part-time employees. TOPSIS is a multicriteria decision-making method based on a concept where the chosen alternative has the closest distance from a positive ideal solution and also has the farthest distance from a negative ideal solution. The completion criteria applied to the selection of employees include the results of written tests, psychological tests, health tests, and interviews. The results of the tests show that the TOPSIS method can be used well in selecting and sorting from the largest to the smallest value with an accuracy rate of 85% in the amount of 20 data. Keywords: hospital, employee selection, TOPSIS, decision support system PermaLink | Plain Format | Corresponding Author (Diena Rauda Ramdania)

750	Information Engineering	ABS-347
The Design and Evaluation of An Automatic Watering System by Using Fuzzy Mamdani Erfan Rohadi, Amalia Amalia, Afifah Nidianingsih, Sofyan Noor Arief, Rudy Aryanto, Dimas Wahyu Wibowo State Polytechnic of Malang. Jl. Soekarno Hatta No. 9 Malang 65141 Abstract The Fruits and vegetables are commercial commodities that are high in demand, recently. However, pest attacks are the main cause of crop failure. The common activity of farmers is that they spend their time just to filter vegetables that are still using manual systems. By using an automatic watering system with a soil moisture sensor and a temperature sensor based on Fuzzy Logic can provide water to vegetables according to their needs. In the practical, the Chinese Greens Cabbage have been watered with automatic systems. The results show that automatic watering systems have better production than manual watering systems. The soil moisture sensor output produces a low or high output. When heating the soil 80%, it shows moist soil conditions and when soil moisture is 40%, the soil conditions produce dry output. Based on the testing that has been done, it is obtained that the ideal temperature that allows vegetables to grow is 24 Celsius, soil moisture level of 27%, with a duration of 30 seconds watering. As a result, the automation systems promises for the cultivation of vegetable plants around the home living. Keywords: Soil Moisture Sensor, Temperature Sensor, Fuzzy Logic, Fuzzy Mamdani PermaLink | Plain Format | Corresponding Author (Amalia Amalia)

Page 25 (data 721 to 750 of 1039) | Displayed ini 30 data/page
<< PREV 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 NEXT >>

Powered By Konfrenzi 1.832K-Build4 © 2025 All Rights Reserved